|
| |
ImageCraft eBox-AVR™
|
 |
in stock |
 |
$
149.00
eBox-AVR with ICCV7 for AVR Non-Commercial version compiler.
- Complete ATMega16 based kit with keypad, LED, LCD etc. 10 example projects. Bundled with ICCV7 for AVR Non-Commercial version Compiler. Everything you need to learn embedded programming with the Atmel AVR.
|
9 |
$
109.00
eBox-AVR basic kit for existing compiler users.
- Complete ATMega16 based kit with keypad, LED, LCD etc. 10 example projects. You must either be purchasing an ICCV7 for AVR compiler at the same time or are a current user. Everything you need to learn embedded programming with the Atmel AVR.
|
4 |
| |
| |
CANDIP Embedded Microcontroller Boards with Controller Area Network (CAN) & library (from Lawicel) |
in stock |
 |
$
80.00
CANDIP/AVRM162
- contains Atmel AVR microcontroller ATMega161 and CAN controller SJA1000 from Philips
|
0 |
 |
$
160.00
CANDIP/ST1M162
- CANDIP with Activity Board.
|
0 |
|
$
125.00
CANLIB/1 library object code
- ICCAVR CAN library, object only. For use with CANDIP hardware.
|
N/A |
|
$
399.00
CANLIB/SRC library source code
- ICCAVR CAN library, source code. For use with CANDIP hardware.
|
N/A |
| |
| |
AVR Development Boards (from Lawicel) |
in stock |
 |
$
65.00
StAVeR-24M32
- Small sized Mega32 based DIP24 controller with pre-porgrammed serial bootloader for flash programming without an ISP.
|
1 |
 |
$
120.00
StAVeR-24M32/MB
- Small sized Mega32 DIP24 based controller with motherboard/LCD/buttons etc. The mega32 is pre-programmed with a serial bootloader for flash programming without an ISP.
|
3 |
| |
| |
Ethernut (from Egnite) |
in stock |
 |
$
160.00
Ethernut Bulk 1.3 Rev. H
- Ethernet board for attaching custom hardware directly to a network. It is a full Internet node build on a standard, half-sized Euroboard. Pre-loaded software. ATmega128 AVR running at 14.7456 MHz, 10 MBit Realtek Ethernet Controller and 32 kByte external SRAM.
|
0 |
|
$
200.00
Ethernut Starter Kit 1.3
- Bulk kit plus ISP programming dongle, CD and manual.
|
0 |
 |
$
190.00
Ethernut Bulk 2.1 Rev. B
- Ethernet board for attaching custom hardware directly to a network. It is a full Internet node build on a standard, half-sized Euroboard. Pre-loaded software. ATmega128 AVR running at 14.7456 MHz, 100 MBit SMSC Ethernet Controller and 512 kByte banked SRAM.
|
0 |
|
$
220.00
Ethernut Starter Kit 2.1
- Bulk kit plus ISP programming dongle, CD and manual.
|
0 |
|
($
TBD)
Ethernut Bulk 3.0 Rev. D
- Advanced ARM based board with 8 MBytes Flash and 256 kBytes linear SRAM, MMC/SD-Card Socket, three programmable PLLs etc. A DM9000E controller is used for the 100 MBit Ethernet Interface. (Availability TBD)
|
0 |
| |
($
TBD)
Ethernut Starter Kit 3.0
- Advanced ARM based board with 8 MBytes Flash and 256 kBytes linear SRAM, MMC/SD-Card Socket, three programmable PLLs etc. A DM9000E controller is used for the 100 MBit Ethernet Interface. Availability TBD.
|
0 |
 |
$
100.00
Ethernut Medianut
- MediaNut addon for the AVR Ethernut modules (both 1.x and 2.x)
|
0 |
